Language:
    Register

Aluminum Sheet

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Cold Rolled Sheets
Width: • Standard: 915mm, 1220mm
• Non-standard: 400mm – 1200mm (for thickness of 0.7mm and Above)
• 500mm – 915mm (for thickness of 0.7mm and below)
Length • Standard: 1830mm, 2440mm, 2745mm, 3050mm
• Non-standard: 1000mm – 4350mm
Thickness: 0.56mm – 5.00mm (length & width for sheets having thickness of over 4.00mm is subject to confirmation)
Temper: F / M, O, H1, H2, H3, H4 O, H1, H2 (for sheets in thickness over 3.25mm & in width over 915mm – 1200mm)
Alloys: Al, Al-Mn, Al-Si, Almg etc.
Finish: Mill Finish
 
Corrugated Sheets
There are mainly two types of Corrugated Sheets:
• Circular Corrugated (General Purpose) Sheets
• Industrial Troughed Sheets
 
Circular Corrugated (General Purpose) Sheets
Width: • Corrugated Sheet: 800mm, 1100mm
• Length of Sheet: 1830mm, 2135mm, 2440mm, 2745mm, 3050mm, 3355mm, 3660mm, 3965mm (Standard) 1830mm – 4000mm (Non-standard)
Depth of corrugation: 19mm
No. of corrugations: 10/75 for 800mm Width
14/75 for 1100mm Width
Width of corrugation: 75mm
Thickness of corrugation: 0.40mm – 1.63mm
Alloys: 31000, 40800, 31500, 51300
Temper: H4
Finish: Mill Finish
Industrial Troughed Sheets
 
Width: • Corrugated Sheet: 795mm, 920mm
• Length of Sheet: 1830mm, 2135mm, 2440mm, 2745mm, 3050mm, 3355mm, 3660mm, 3965mm (Standard) 1830mm – 4000mm (Non-standard)
Depth of corrugation: 38mm
No. of corrugations: 6/125 for 795mm Width
7/125 for 920mm Width
Width of corrugation: 125mm
Thickness of corrugation: 0.5mm – 1.63mm
Alloys: 31000, 40800, 31500, 51300
Temper: H4
Finish: Mill Finish
 
Chequered Sheets
These are plates or sheets subject to chequering operation and are generally made in Alloy 65032.
General Chequered Sheets
Length: 2440mm, 3660mm (Standard)
2000mm – 4000mm
Thickness: 1.5mm – 3.25mm
Alloys: 65032
Temper: W, WP, M
Finish: Mill Finish
 
A
Length: 2000mm - 4000mm
Thickness: 1.0mm – 3.25mm
Alloys: Special
Temper: M
 
B
Standard Width: 915mm, 1220mm, 1500mm
Length: 1830mm - 4350mm
Thickness: 0.7mm – 1.5mm
Alloys: Special
Temper: M
 
 

Best Deals for Today...

To share our experience, intelligence, breadth of resources in the trading of Metals and to achieve Maximize profits for our customers Ni-Met proposes to have instant trading zone on the click of button...