Language:
    Register

Coils

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Hot Rolled Coils
Width (Untrimmed): In as rolled condition
• Standard: 890mm, 965mm, 1270mm, 1540mm (approx.)
• Non-standard: 800mm - 1540mm
• Tolerance: Not applicable
Thickness: 4.50mm – 12mm for normal alloys (i.e. alloys of Al, Al-Mn, Al-Si, etc.) 4.50mm – 8mm for hard alloys (i.e. alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg, etc.)
Diameter: 750mm without spool
Coil Density: 2.25kgs/mm Width (approx.)
Coil Weight: 1000 – 4000 kgs
Temper: M, O
Finish: Mill Finish
Hot Rolled Plates
Width (Untrimmed): In as rolled condition
• Standard: 865mm, 965mm, 1015mm, 1100mm, 1270mm, 1540mm (approx.)
Width (Trimmed): • Standard: 915mm, 1220mm, 1500mm (approx.)
• Non-standard: 800mm - 1498mm
Thickness (Untrimmed): 4mm – 200mm
Thickness (Trimmed): 6.5mm – 12mm for normal alloys (i.e. alloys of Al, Al-Mn, Al-Si, etc.) 6.5mm – 80mm for hard alloys (i.e. alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg, etc.)
Weight: Depends on dimensions
Temper: F / M, O, H1
Finish: Mill Finish
Cold Rolled Coils / Strips
Width (Untrimmed): In as rolled condition
• Standard: 965mm, 1270mm, 1540mm (approx.)
• Non-standard: 800mm - 1540mm
Width (Trimmed): • Available for thickness range of only 0.4mm – 2.0mm
• Standard: 915mm, 1220mm, 1500mm (approx.)
• Non-standard: 25mm - 1500mm
Thickness: 0.4mm - 8.0mm for heat-treatable alloys (i.e. alloys of Al-Mg-Si, Al-Cu-Mg-Si, Al-Zn-Mg-Si, etc.) 0.4mm - 4.0mm for non-heat treatable alloys (i.e. alloys of Al, Al-Mn, Al-Si, Al-Mg, etc.)
Arbour Diameter: • Untrimmed: 750mm with full weight coils
• Trimmed: 200mm – 500mm with increase of multiple of 50mm for coils with width range 100mm – 630mm, & 500mm for coils with width range 630mm-1500mm
Coil Density: 1.0 – 1.5kg/mm Width (approx.)
Coil Weight: 1000 – 3000kgs (untrimmed coil), 250kg (trimmed coil)
Temper: M, O, H1, H2, H3, H4 (for coils of thickness 0.4mm – 2.0mm in trimmed condition with coil density of 1-2kg/mm width, & O, M with untrimmed edges in heat-treatable alloys
Finish: Mill Finish
 
 

Best Deals for Today...

To share our experience, intelligence, breadth of resources in the trading of Metals and to achieve Maximize profits for our customers Ni-Met proposes to have instant trading zone on the click of button...