Language:
    Register

Zinc Scrap

Saves
Scabs
Scope
Score
Screen
Scull
Scrub
Seal
Seam
Shelf

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Saves

Old Zinc Die Cast Scrap

Shall consist of miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings.

All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.

Top
 
Scabs

New Zinc Die Cast Scrap

Shall consist of new or unused, clean, zinc base die castings; Castings to be unplated, unpainted, and free from corrosion.

 
Top
 
Scope

New Plated Zinc Die Cast Scrap

Shall consist of new or unused clean, plated zinc base die castings, free from corrosion.

Top
 
Score

Old Scrap Zinc

Shall consist of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anticorrosion plates.

Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.

Top
 
Screen

New Zinc Clippings

Shall consist of any new pure zinc sheets or stampings free from corrosion.

Top
 
Scull

Zinc Die Casts Labs or Pigs

Shall consist of melted zinc base die cast materials, in smooth clean solids labs or pigs, Material to be free from drosses and to contain a minimum zinc content of 90%.

To contain a maximum of 0.1% nickel and maximum of 1% lead. Blocks are acceptable upon mutual agreement.

 
Top
 
Scrub

Hot Dip Galvanizers Slab Zinc Dross (Batch Process)

Shall consist only of galvanizers unsweated zinc dross in slab form from hot dip galvanizing (Batch Process) with a minimum zinc content of 92% and shall be free of skimmings and tramp iron.

Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment. Slabs shall not weigh over 90 pounds each, heavier pieces acceptable upon mutual agreement between buyer and seller. Material from continuous galvanizing operation is not acceptable. Blocks are acceptable upon mutual agreement.

 

Top
 
Seal

Continuous Line Galvanizing Slab Zinc Top Dross

Shall consist of unsweated zinc dross removed from the top of a continuous line galvanizing bath, in slab form not weighing in excess of 100 pounds each, with a minimum zinc content of 90%.

Heavier pieces acceptable upon mutual agreement between buyer and seller; Shall be free of skimmings. Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.

Top
 
Seam

Continuous Line Galvanizing Slab Zinc Bottom Dross

Shall consist of unsweated zinc dross removed from the bottom of a continuous line galvanizing bath, in slab form not weighing in excess of 100 pounds each, with a minimum zinc content of 92%; Heavier pieces acceptable upon mutual agreement between buyer and seller. Shall be free of skimmings.

Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.

 

Top
 
Shelf

Prime Zinc Die Cast Dross

Shall consist of metal skimmed from the top of pot of molten zinc die cast metal; Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion or oxidation.

Should be poured in moulds or in small mounds weighing not over 75 pounds each; Zinc content shall be minimum of 85%.

Top
 
 

Best Deals for Today...

To share our experience, intelligence, breadth of resources in the trading of Metals and to achieve Maximize profits for our customers Ni-Met proposes to have instant trading zone on the click of button...